I've installed the E3D hotend (with the extended arm) but I can't get the extruder to get any lower to the bed. The hot end remains several millimeters above the bed and cannot be lowered through the Tuning/Babystepping-Z menu during print time.
I've tweaked the Z axis settings under “Prepare/Move Axis/Move Z/Move 0.1mm” until the hot end is a hair away from the bed. Storing the memory of that position and loading the memory does nothing and the extruder returns to it's original spot 5-6 mm above bed. It simply ignores all of my settings.
I've tweaked the Z axis settings under “Prepare/Move Axis/Move Z/Move 0.1mm” until the hot end is a hair away from the bed. Storing the memory of that position and loading the memory does nothing and the extruder returns to it's original spot 5-6 mm above bed. It simply ignores all of my settings.